TITEBOND ACOUSTICAL SMOKE & SOUND SEALANT

Titebond Acoustical Smoke & Sound Sealant is a professional-quality sealant designed to improve STC (Sound Transmission Class) ratings in wall and floor systems. It tools easily, is paintable, mold and mildew resistant, remains flexible and will not become hard or brittle with age. This plasticizer-free, VOC-compliant, nonflammable formula is environmentally safe.

Features & Benefits


  • IDEAL FOR: Sealing air gaps between floor/plate and around partition panels, repairing cracks, eliminating rattles in drywall/plaster and bonding drywall panels together.
  • SEALS: Drywall, concrete, wood, metal, masonry, brick, stone, ceramic tile, marble, aluminum, piping including PVC and CPVC and most common building materials.
  • Prevents smoke and flame spread
  • Improves sound transmission (STC) ratings
  • Easily tools with one pass
  • Environmentally safe - VOC-compliant
  • Cleans easily with water in wet state
  • Mold & mildew resistant
  • Paintable

SPECIFICATIONS

Exceeds:
  • ASTM C834
  • ASTM C920 Type S, Grade NS, Class 25, M, G and A
  • CA 01350
  • LEED v4
UL Tested and classified

Tested in accordance with ASTM E84

Appropriate for application and use in accordance with:
  • ASTM C919
  • ASTM E90
Meets:
  • NFPA Class A Fire Rating (0 smoke; 0 flame spread).

Application Guidelines


  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: -20°F to 150°F (-29°C to 66°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 10-15 minutes for 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Cut nozzle to desired bead size. 3. Puncture foil seal and place in cartridge gun. 4. Apply sealant underneath all runners at the ceiling and floor. 5. Sealant should also be applied to all openings including cutouts, electrical boxes, perimeter joints and other areas where sound transmission and air infiltration may occur. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    28 oz. Cartridge 343 ft. 86 ft. 38 ft. 21 ft.

STC Ratings

Edge Detail STC Value Comments
Uncaulked 29 The open-edge track gave the STC value of 29 through direct leakage
Single bead at the perimeter of one base layer 49 This bead closed void but did not seal leakage around the joint between wallboard and track
Two beads, one under each base layer of gypsum board 53 The beads closed void and sealed leakage around track
Note: Taken from ASTM C919. The test partitions of metal studs 610 mm (24 in.) on center, with double layers of 13 mm (0.5 in.) wallboard screw-attached to each side. Sound attenuation blanket, 38 mm (1.5 in.), was placed in the void. The partition panels were erected, shimmed out 3mm (0.125 in.) at the periphery: top, bottom, and edges.


Surface Burning Characteristics for Building Materials

Flame Smoke
0.0 0.0
0.0 0.0
Tested as applied in two 1/4" diameter beads, 8 in. O.C.(Coverage: 2.8 percent of the exposed test sample area). UL 723 Classified


Physical Properties


  • Type: Siliconized elastomeric acrylic
  • Calculated VOC: <50 g/L (<2.5%)
  • Weight Per Gallon: 12.72 lbs.
  • Color: White
  • Flashpoint: > 200°F
  • Solids: 79%
  • Freeze / Thaw Stability: Stable
  • Viscosity: 170,000
  • pH : 7.5
  • Storage Life: 24 months in a dry location at or below 75°F

Limitations


Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. This product is freeze/thaw stable. For best results, store in a dry location at or below 75°F.

Product SKUs


Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
28920370830289281003708302892528 Oz. Cartridge36.401244
28970370830289735 Gallon Pail66.87124

Warranty Statement


Liability is limited to product replacement only

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International