Titebond® UA 920 Sealant is a high performance, urethane acrylic formula which eliminates shiners, reduces dirt pickup and has great UV resistance. It requires no priming or mixing and provides an airtight, water-resistant seal. It remains permanently flexible and spans gaps up to 2” wide.

Features & Benefits

  • IDEAL FOR: Sealing around siding, windows and doors. Interior/exterior sealant for nearly any project.
  • SEALS: Siding, windows, doors, concrete, metal, wood and most common building materials.
  • High Performance for Siding, Windows & Doors
  • Meets AAMA 808.3
  • 800% Elongation
  • Adhesive or Sealant Use
  • Paintable with water-based (latex-based) paints
  • VOC-compliant
  • Mildew resistant
  • UV resistant
  • Suitable for all climates
  • No priming or mixing required
  • 50% total joint movement


Complies with the following requirements:
  • ASTM C920, CLASS 25
  • AAMA 808.3

Application Guidelines

  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: -40°F to 180°F (-40°C to 82°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 15 minutes for a 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint depth is half as thick as width but not to exceed ½ inch thickness (on joints over 1 inch wide). 2. Cut tip at 45° angle to desired bead width and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. NOTE: If using as an adhesive, bracing may be required until the product dries. Mechanical fasteners should be used for heavy loads.
  • Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.


  Dry Peel Adhesion Wet Peel Adhesion
Aluminum 32-42 FD/C 20-28 C
Glass 39-45 FD/C 25-28 C
Cement (8) SF 14-24 C

Physical Properties

  • Type: Urethane acrylic
  • Calculated VOC: <50 g/L (<1.5%)
  • Color: White, clear and medium bronze
  • Solids: 69% white & colors,
    61% clear
  • Flashpoint: Solvent free/Not applicable
  • Freeze / Thaw Stability: Stable
  • Viscosity: 550,000 cps
  • Storage Life: 24 months in a dry location at or below 75°F


Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours. Do not use for aquariums. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F. NOTE: Titebond UA 920 Clear (8741) will be white during application but will clear within 7-14 days, depending on temperature, humidity and bead size.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
87010370830870171003708308701410.1 Oz. Cartridge - White11.0012108
87310370830873141003708308731110.1 Oz. Cartridge - Bronze11.0012108
87410370830874131003708308741010.1 Oz. Cartridge - Clear11.0012108
87610370830876111003708308761810.1 Oz. Cartridge - Medium Bronze11.0012108

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International