TITEBOND RADON SEALANT

Titebond Radon Sealant is a non-chemically curing sealant combining flexibility and durability to help prevent radon entry. This permanent sealant allows ± 25% joint movement, is easy to tool, and is UV, mold and mildew resistant. Use on foundation cracks, joints and penetrations, around pipes, foundation coatings normally used for damp proofing and membranes surrounding the foundation. Note: According to the EPA, sealants can help limit the entry of radon through the foundation. It is also recommended that a professionally installed radon mitigation or fan-based system be used in conjunction with this sealant.

Features & Benefits


  • IDEAL FOR: Reducing the entry of radon through the foundation.
  • SEALS: Concrete, galvanized steel, wood and most common building materials.
  • Reduces radon entry
  • Seals foundation gaps
  • Effective barrier to air, dirt, insects and radon
  • Mold & mildew resistant
  • Easy paintability and cleanup

SPECIFICATIONS

Exceeds:
  • ASTM C920 Type S Grade NS Class 25
  • ASTM C834 Type OP Grade -18°C
  • Federal Specification TT-S-00230C Type II Class A

Application Guidelines


  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: 0°F to 160°F (-18°C to 71°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 10-15 minutes for a 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free from any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in depth. 2. Cut nozzle at 45° angle for a 1/8” to 1/2” bead and place in cartridge gun. 3. Make sure concrete is dried and cured. Apply sealant into clean joint. If necessary, smooth bead immediately with a damp sponge. No tooling is required. Product adheres to most substrates expect polyethylene or polypropylene faced membranes. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Painting: The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex-based) paint.
  • Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties


  • Type: Elastomeric Acrylic
  • Calculated VOC: <1.5%
  • Color: Concrete gray
  • Solids: 80%
  • Flashpoint: Solvent free/Not applicable
  • Viscosity: 133,000 cps
  • Freeze / Thaw Stability: Stable
  • Storage Life: 24 months in a dry location at or below 75°F

Limitations


Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Product SKUs


Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
32510370830325121003708303251910.1 Oz. Cartridge - Concrete Gray13.8312108

Warranty Statement


50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.