Titebond® Blacktop Repair is a durable, acrylic-latex formula for the repair of cracks in asphalt driveways, playgrounds, pavement and parking lots. It offers excellent adhesion and flexibility, which are superior to traditional tar or asphalt repair products. In addition, it resists oil, gas, grease and salt and it will not chip, peel or pull away from the surface. Titebond Blacktop Repair dries quickly to a textured black color that blends well with the surrounding surfaces. It provides an air-tight water-resistant seal that helps prevent water and ice damage. In addition, Titebond Blacktop Repair is ready to use, extrudes easily and cleans up with water when wet.

Features & Benefits

  • Fills and seals cracks in asphalt surfaces
  • Durable - Resists oil, gas, grease and salt
  • Textured formula blends with surface
  • Extrudes easily & cleans up with water
  • Mildew resistant
  • UV-resistant



Application Guidelines

  • Application Temperature: Above 40°F and below 120°F
  • Service Temperature Range: -25°F to 180°F
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 10-15 minutes for a 1/4" bead
  • Working Surfaces: Surfaces must be cleaned down to the original substrate, dry, and free from any material that may deter adhesion.
  • Cleanup: Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Physical Properties

  • Type: Acrylic
  • Non-reactive VOC: 21 g/L (<1.5% wt.)
  • Color: Black
  • Weight Per Gallon: 14.02 lbs.
  • Solids: 83%
  • Flashpoint: Solvent free/Not applicable
  • Viscosity: 550,000 cps
  • Freeze/thaw Stability: Stable
  • Storage Life: 24 months in tightly closed containers at 50°F to 80°F


Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Titebond Blacktop should be dry to the touch and ready to paint in 2-4 hours. Allow to cure 24 hours before direct contact with water. Wait 24 hours prior to coating with an asphalt or tar based driveway sealer. It is not designed for continuous submersion or use below the waterline. For questions, please call our Help Line at 1-800-347-4583.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
31810370830318121003708303181910.1 Oz. Cartridge15.4212108

Caution Statement

WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains limestone, ethylene glycol, acetaldehyde, vinyl acetate and crystalline silica. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583

Franklin International