- Moderate speed of set
- Economical alternative to contact cement
- Dries translucent
- Water cleanup & non-toxic
- Suitable for large-scale flat laminating
- Suitable for panel-on-frame cold press applications
Calculated VOC: 3.2 g/L
State : Liquid
Weight/gallon : 9.7 lbs.
Color : Off White
Chalk temperature: Approximately 50°F.
Dried Film: Translucent
Flashpoint : > 200°F.
Solids : 42%
Freeze/thaw stability : Stable
Viscosity : 4,500 cps
pH : 4.9
Storage life : 12 months in tightly closed containers at 70°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Bond Strength ASTM D-905 (On Hard Maple)
Open assembly time
15 minutes (70°F./50% RH)
Total assembly time
15-20 minutes (70°F./50%RH)
Minimum required spread
Approximately 6 mils or 250 square feet per gallon
Required pressure application
30-80 psi for HPL, 100-150 psi for Panel-on-Frame,
100-250 psi for Veneer
Method of Application
For most consistent coverage a mechanical spreader is recommended.
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Cold Press for HPL is specifically designed for laminating flexible materials and is not suited for other types of assembly applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 50°F. Not recommended for exterior use or where moisture is likely. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.
CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate. Don not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: if swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
|Part No.||Size||Weight(lbs.)||UPC||Case UPC||Units Per Package||Packages Per Pallet
|4617||5 Gallon Pail||51.58||037083046175|| ||1||24
|4618||55 Gallon Drum||575.05|| || ||1||4