- Works extremely well in cooler temperatures
- Ideal for plywood, particleboard and OSB
- Ideal for wet, frozen and ACA & CCA treated lumber
- Fills irregularities between materials to provide a more solid backup surface
- Exceeds the requirements of CAN/CGSB-71.25M and CAN/CGSB-71.26M specifications
Type: Synthetic elastomeric polymer
Calculated VOC: 389 g/L
State : Medium-viscosity mastic
Weight/gallon : 9.81 lbs.
Color : Light tan
Flashpoint : < 0°F.
Solids : 67%
Freeze/thaw stability : Will not freeze
Viscosity : 130,000 cps
Storage life : 18 months in tightly closed containers at 75°F.
Coverage (maximum): Approximate length of bead according to bead diameter
| Container |
1/8” bead |
1/4” bead |
3/8” bead |
| 10.5 oz. Cartridge |
129 ft. |
32 ft. |
14 ft. |
| 29 oz. Cartridge |
355 ft. |
89 ft. |
39 ft. |
Application Temperature
0°F. to 100°F.
Service Temperature Range
-20°F. to 120°F.
Method of Application
Cartridge/caulking gun
Working Surfaces
Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply adhesive to each piece of furring, studs or floor joists to be covered. When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
Working Time
Approximately 10-20 minutes for a 1/4" bead
Cleanup
Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Titebond All Weather Subfloor Adhesive is not designed for continuous submersion or for use on polystyrene foams. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive.
DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross-ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can cause eye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can cause central nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. First Aid: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains toluene, a chemical known to the State of California to cause birth defects or other reproductive harm.
| Part No. | Size | Weight(lbs.) | UPC | Case UPC | Units Per Package | Packages Per Pallet |
| 5491 | 10 Oz. Cartridge | 10.91 | 037083054910 | 10037083054917 | 12 | 108 |
| 5492 | 28 Oz. Cartridge | 28.92 | 037083054927 | 10037083054924 | 12 | 44 |