Caulks & Sealants

Application Guidelines

Application Temperature:

Above 40°F and below 120°F

Service Temperature Range:

-25°F to 180°F

Method of Application:

Cartridge/caulking gun

Working Time:

Approximately 15-20 minutes for a 1/4" bead

Working Surfaces:

Surfaces must be cleaned down to the original substrate, dry, and free from any material that may deter adhesion. Bare surfaces should be primed before caulking.

Dry Time:

Sealant should be dry to the touch and ready to paint in 2-4 hours.

Cleanup:

Clean excess material with a damp cloth. Clean hands and tools with soap and water. Scrape dried excess.

Coverage:

Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
10.1 oz. Cartridge	123 ft.	31 ft.	14 ft.	8 ft.

Limitations:

Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Sealant should be dry to the touch and ready to paint in 2-4 hours. It is not designed for continuous submersion or use below the waterline. Note: According to the EPA, sealants can help limit the entry of radon through the foundation. It is also recommended that a professionally installed radon mitigation or fan based system be used in conjunction with this sealant. For questions, please call our toll free Help Line at 1-800-347-4583.